Polyurea Systems Equipment
When applying your Polyurea Systems products, the selection and utilization of proper equipment is important to the success of your project. Please review the Product Data Sheet of the product you are applying for specific application instructions.

GlasCraft-MH	H-20/35 Pro	Reactor

GlasCraft MH
GlasCraft offers a variety of machines, in both hydraulic- and pneumatic-powered configurations, along with specialized gun designs, to satisfy the needs of either high pressure or low pressure process and material technology.

Although low pressure materials can be sprayed, they are commonly used in joint fill, caulk and sealant applications as well. High pressure application of polyurea is typically spray applied using high performance, industry-proven guns like the GlasCraft Probler P2.

The plural-component fast set coatings and linings market continues to evolve as a preferred and higher performance coating and lining choice in a number of highly engineered industrial and consumer oriented applications around the world.

H-20/35 Pro
New AmpLok (tm)Automatic Hose Sensing Control Circuit. Voltage and Amperage requirements are automatically matched to the hose length no settings or adjustments are needed. Electrical circuit has fewer components for greater reliability and ease in servicing.

New Automatic Hose Heat Power Transformer. Designed to operate with up to 410 ft. (124.96 m) hose. Matched control circuitry assures faster warm up and response time for unequaled temperature maintenance.

New patent pending Hybrid Heater · 1X220 Volt Machine 12,000 Watts is standard. 3X220/3X380 Volt Machines 12,000 standard, 18,000 Watt option available at no additional charge. Rapid heating and recovery with up to 90 degrees Fahrenheit (32 Celsius) Delta T best describes the performance of these Heaters. The hybrid design provides stable operating temperatures and minimizes temperature overshoot

Digital temperature controllers are used for optimum control of material processing temperatures

New Hydraulic Pump Mounted Locking Pressure Compensator Control· key furnished to "set and lock" · prevents miss-adjustment during operation

Reactor ( H-25 and H-XP2)
Entry-Level Hydraulic Proportioners for Spraying Foam and Polyurea

The first hybrid Graco|Gusmer units on the market!
Graco's Reactor H-25 and H-XP2 are lightweight, easy-to-use hydraulic units that combine the horizontal Gusmer pump line and Graco technology, including digital controls and system diagnostics. These sprayers are ideal for plural-component polyurethane spray foam, tank and pipe coating, in-plant OEM, adhesives and caulk, rim and band joist applications. Reactor H-25 and H-XP2...reliable performance and industry-proven technology from Graco|Gusmer.

• High performance, horizontal pumping system
• Lightweight yet durable hydraulic system featuring a five-quart reservoir - 170 pounds lighter than the standard 25-gallon reservoir!
• Softstart technology uses 1/3 less amp draw than a standard starter, so you can use a smaller generator and also reduce wear and extend your generator life
• Hybrid heater design gives you up to 15,300 watts of heat to pre-heat material quickly
• Programmable standby mode shuts the motor and hydraulic pump down after a period of inactivity to prevent overheating

1. Remote mountable controls are fully digital and easy to use
2. New lightweight hydraulics are only a fraction of standard hydraulic units
3. Reliable horizontal pump allows you to spray longer
4. High output heaters with maximum temperatures of up to 15,300 watts
5. Optional data reporting keeps better records by monitoring and tracking material usage
6. New troubleshooting Y-strainer-pressure and temperature gauges are standard on every unit
7. User-defined controls allow you to program settings for standby mode and pressure imbalance detection

If you have any additional questions concerning the correct equipment for your application, please contact our technical support team and we will be pleased to answer your specific questions. For more information, please contact us.

(877) 836-2648 info@polyureasystems.com
© Copyright 2005 - 2007 Polyurea Systems